|
|
|
|
|
|
|
Call us at
316-440-2828
REBCO MACHINE
2009 PRICE LIST
Price list for piston alteration operations performed by Rebco Machine. This list is intended for general reference only. Due to the variety of piston styles and stages that are available, actual billing will be based upon operations required to complete a work order.
HIGH PRIORITY SERVICES
WE OFFER PRIORITY EXPEDITING SERVICES FOR THOSE IN NEED OF IMMEDIATE RETURN OF PISTONS. THE FOLLOWING FEES ARE IN ADDITION TO REGULAR PRICING. NO DISCOUNTS WILL BE GIVEN. FEES ONLY APPLY TO SERVICES REQUIRED TO COMPLETE THIS SERVICE.
(SERVICE MAY NOT ALWAYS BE AVAILABLE DUE TO CIRCUMSTANCES BEYOND OUR CONTROL)
SAME DAY IN/OUT 25%
NEXT DAY OUT 15%
Listed prices are for a minimum of four pcs. Less than 4 pcs. will be prorated from base price list as noted. Price listed is per part unless otherwise noted.
One pc.- 180% Two pcs.-160% Three pcs.- 140%
Minimum work order billing $40.00
Dome Profiling
Dome Profiling per chamber mold or sample pistons 3-d dome Profile, multiple levels
Right and Left hand chambers will require Right and Left hand patterns.
| Dome Height | General piston type | |
| .000 to .100 | pro stock type | 10.00 |
| .101 to .250 | 15 degree small block | 12.25 |
| .251 to .500 | 23 degree small block | 14.85 |
| .501 to .750 | 26 degree bb 454 type | 17.00 |
| over .750 tall | 18.75 | |
| Hemi | 15.25 |
COMPRESSION HEIGHT
| Establish compression height in combination with dome Profile (solid blob) | 5.00 |
| Deck common to existing profile (blended to Deck) | 6.75 |
| Deck flat top piston | 4.50 |
VALVE
RELIEFS
Valve relief prices listed are per pocket, intake or exhaust. Plunge cuts include elliptical pocket with offset entry and exit angles and trim shroud height.
| Piston Type | Valve Relief Type | |
| Flat Top | Wedge / Flycut | 5.25 |
| Flat Top | Splayed / Flycut | 5.75 |
| Dome | Wedge / Flycut | 5.50 |
| Dome | Splayed / Flycut | 6.25 |
| Dome | Wedge / Plunge | 6.75 |
| Dome | Splayed / Plunge flat | 7.25 |
| Dome | Splayed / Plunge tulip | 8.75 |
| Dome | Hemi BB Type / Flycut | 6.50 |
| All | CNC Tulip custom sizes | 10.50 |
| Stocker | Double pocket Flycut 2 or 4 reliefs | 8.50 |
FABRICATE CHAMBER MOLDS
| Fabricate chamber mold single | 40.00 |
| Fabricate chamber mold pair | 45.00 |
| opposite chamber pattern for profiling | 40.00 |
| Valve Relief checker Dome Type | 45.00 |
| Valve Relief checker Flat top | 35.00 |
| Dome mold kit w/ wax | 28.50 |
| 26 lbs. mold material | 80.00 |
| 1 can spray release | call |
GAS PORTS
| Vertical | 11.00 |
| Vertical (top ring more than .350 down) | 13.50 |
| Lateral | 11.00 |
| Special | 13.50 |
[Page1] [Page2] [Page3] [Page4] [Page5]
© Copyright by Rebco Machine 2005.
All rights reserved. Reproduction of material appearing on this Web site
is strictly prohibited without written permission.